Ceiling Fan Remote Control Kit, Small Size Universal Speed, Light & Timing 3 in 1 Wireless Control, for Harbor Breeze Hunter Hampton Bay Lichler Ceiling Fans Light Remote

I purchased and installed four of these ceiling fan & light remote control kits; this package of three and a separate package of one. I installed them on a Harbor Breeze 44" Keyport fan with lights, two Harbor Breeze 52" Calera with co-installed Calera light kits, and a Hunter 52" Type T (new metal stamped motor frame version, not original cast iron motor frame with oil lubrication version) with co-installed Harbor breeze Calera light kit. All four of these units were simple to install having only five wires to connect; two clearly marked inputs and three clearly marked outputs. All four ceiling fans were installed previously about ten years ago using retrofit hangers (cut a hole in the ceiling, insert the mounting/hanging bracket with outlet box through the ceiling hole, and reach through the hole from below to adjust/expand the bracket to support the fan). These retrofit hangers a have small space for the wires and this receiver module, but by rearranging the wiring space was made available without modifying anything. I am pleased with the final result and would do it over again in a different house, if wife required. One of these existing fans gets used considerable more than the others and I've had to replace the pull chain switches and was expecting to have to repeat this again soon (not now). Three minor complaints against these fan & light kits are the wire nuts are too small, the two input wires need additional insulation stripped for the wire nuts, and the two wood screws for attaching the remote holder are not for drywall installation. As others have mentioned this kit does not have a light dimmer capability and it does NOT claim to have it. I did have a minor problem with the single kit package order; I was sent a USED/RETURNED unit that was inoperative, but Amazon made it good by sending a NEW one. I can't fault the manufacturer or the design for the practices of a vendor. All's well that ends well.

I bought this remote as a replacement for the original one that came with my Harbor Breeze ceiling fan, and it worked perfectly without needing to replace the fan itself – a huge plus!The receiver unit is compact, which made it much easier to fit into the canopy compared to bulkier models. The wiring was also straightforward – standard color-coded wires made installation a breeze (lol). The antenna wire is long enough that I was able to tuck it neatly toward the down rod through the center of the canopy, keeping it completely out of sight without affecting the signal.One of the standout features for me is that the remote uses 2 AAA batteries. They’re so much easier to find and replace than the odd-sized batteries some remotes use. The range on the remote is excellent too – I can control the fan and lights from across the room with no lag.The only downside is that it doesn't have a memory function. So every time you turn the power back on, it defaults to the lights on and the fan off, which can be a bit annoying if you prefer a different setup. Still, for the price and ease of use, this is a solid replacement.Would definitely recommend for anyone looking to replace a worn-out or lost ceiling fan remote!

The first one stopped working after 10 minutes, submitted a return and Amazon sent another. 2nd one has been working for 2 days now. The small size was still a tight fit inside the canopy cover. So far happy with the product! Great Amazon customer support sending a replacement in about 3 days.

Unit very easy to wire to existing non remote fan. Unit is very small but it still gave a little trouble trying to get under cover. Not impossible but tricky. One thing that it said you can shut off the beep each time you change setting. I haven’t figured that out yet. Would like to change as dog goes nuts when he hears it

I have a flush mount ceiling fan (Harbor Breeze Armitage, 52") that is also the primary source of light in one of my rooms, and I was getting a bit tired of going to the center of the room to turn on the light, especially after dark.It was pretty straightforward to install the remote kit, which easily fit in the fan's housing - I've read that flush mount fans often don't have space for remote receivers, so I was glad to see that. I ended up using a command strip to mount the receiver to the ceiling (and also taped the wires to the receiver), so it wouldn't touch the rotating part of the fan, and that has worked well.The downsides, in my view, are very minor. The remote looks a bit basic/not stylish. My impression is that the max fan speed is a little slower than it was before, but it's still quite fast at the highest setting.All in all, an affordable solution to making my ceiling fan easier to use.

I got three of these to control the three ceiling fans on our covered, open sided deck. They work exactly as described, and I'm happy. There is no way to change the frequency used by the individual remotes; One remote controls one fan. Since I have three fans and thus three identical remotes I used a fine-tip magic marker to make small dots on the white face of each remote: 1, 2 or 3 dots respectively, making it easy to see which remote controls which fan.I suppose it's possible if you order more than one of these remotes that you get two that are "keyed alike". I have no idea how many different combinations there are, but it can't be infinite.

Muy bien llego rápido tremendo producto

Good product