I tried to swap the top by twisting then pulling, but the rigged circular part stayed in the base. I can't attach the new top. How do I fix it?

This PopSockets PopGrip allows users to easily change out the swappable PopTop. Simply push the top down, twist, and release the button portion of the grip, and replace it with another design. The top disc is not intended to be removed.

Will this stick to an acrylic ruler?

This PopGrip sticks best to smooth hard plastic, it may not stick to silicone or waterproof cases.

I just saw someone ask if it could stick to silicone. If it can't, then can there be another layer thats made so that it can? Or is there a glue

100% not true. Silicone will not stick to silicone. But the adhesive on the pop socket is so strong it would most definitely stick to it. Now saying that my concern would be that it would pull at the case. I’m guessing it’s a thin layer silicone case. As long as the case is on tight enough I don’t think you’re gonna have an issue it’s just not as cohesive as like a hard plastic. If you don’t want to put it directly on the silicone. You can use almost any round Disk even one of the older tops for the pop socket that you might have because the sizing would be the same. Then you could super glue that circle onto your silicone. And from there then you can stick it on the hard plastic circle and you would be sticking it to hard plastic rather than silicone. Now using this your pop socket will be a little bit higher of course. I would not try to add extra glue to the adhesive already on the pop socket because they’re not the same type of glue and it could mess up the adhesive that is already there which is very strong. Hope that helps. One of my passions is actually making Decoden phone cases. And I’ve had to be very careful to make sure to not get silicone cases as they are made with silicone that is piped on to a case. So that’s why I said silicone will not stick to silicone. Also the good thing about the pop socket is that even though it’s a little hard you’re gonna want to use like a butter knife around the edges first but you can unstick the pop socket and place it somewhere else. So I think if you try it and you don’t like it you can always remove it. One last thing if you don’t plan on removing it at all you can reinforce the seal in between the pop socket edge on the case once you’ve already put it on just go around the circle base with some super glue or adhesive of your choice and that will make sure to stick the edges on there to reinforce that even more . And anytime you get glue anywhere that you don’t like remember you can always paint over that.

This is stating that it can be removed completely for wireless charging.....how is that accomplished if it has to be placed on the case with adhesive?

This swappable PopGrip must be removed from its base to allow for wireless charging. This PopGrip is fully compatible to charge with the PopPower Home Wireless Charger. We hope this information is helpful!

Desertcart Logo

Up to 70% off + 100% Cashback

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Desert Online General Trading LLC

Dubai, United Arab Emirates

Reviews

た**け

スマホには必需品

類似品もありますがオリジナルが作りもしっかりしてて長持ちします。

22.03.2025

A**O

シンプルイズベスト

透明だからホコリが気になるかもだけど…ホコリが付いてたらすぐ分かるので、これはメリットです!

8.01.2025

み**ん

安定のポップソケッツ

かれこれ5〜6年？くらい歴代のスマホ、ケースに付けてます。手が小さいのでコレがないと持ち辛くて、私には必須アイテムです。ポップソケッツをつけるために、背面は必ずポリカーボネートのツルツル素材のケースを選んでいます。（マットやシリコン素材には付きません）付けた際は、ケースを外しておいて内側からもしっかり押し付けるとガッチリ付いて、一度も途中で落ちたりもしていません。金属アレルギー持ちなので、素材にメタルが使われていないのも良いポイントです。（以前、仕事の支給品のスマホについていたリングが金属製で、指が荒れて悩んでいましたが、しばらくして原因に気付きました）少々お値段はお高いですが、基本的には2年とか平気で持ちますし、商品が古いものじゃなければ、キレイに剥がして再使用も可能です。ワイヤレス充電向けのマグネットタイプも気になりますが、あまりにも高いのでパッと買ってみる気にはなれず…今回も、新しいクリアケース&本体ブラックの雰囲気に合わせて、クリアブラックを買い直しました。スッキリかわいいです。

4.09.2024

S**M

とても良い

ポップソケットはリピートしてます。シンプルですが機能的で使いやすい。残念ながらQ i充電の際に外すので何回か紛失しては再購入してます。

14.12.2024

K**I

リピート購入

1年ほど前にmagsafeウォレットを購入し、愛用しています。根本の固定部が破損してしまい、こちらに付け替える為、購入しました。破損しても安価で換装できる点やリングに比べボールド感が良く、とても気に入っています。

20.10.2023

1**。

これはいい！

スマホの片手操作にもいい。指で挟めるので落ちない。机に置く時もいい。立てかけられる。これからはずーっとこれ使うね。

11.09.2023

K**様

安定感が一番

倒れないです

28.06.2023

齊**介

最低

届いた時には傷だらけで最悪です

19.02.2025

Item Weight	19.9 g
Product Dimensions	0.83 x 7.3 x 14.77 cm; 19.87 g
Item model number	805445
Special features	grip
Other display features	CE
Form Factor	Pop Grip
Color	translucent
Whats in the box	No

PopSockets PopGrip - Extended Stand and Grip with Interchangeable Top - Translucent Black Smoke

Details

Description

Specifications

Have a Question? See What Others Asked

Reviews

Common Questions