AKNESGuliKit TMR Electromagnetic Joysticks for DualSense PS5 / DualSense Edge Controller, Sticks Replacement Accessories for Playstation 5 Controller, Thumbstick Caps included

Okay, so replacing the old ones with these can be a long and hard process (first-time soldering with minimal tools). The quality feels nice and premium, with the interchangeable thumbsticks being a bonus. They sit nicely and tightly and won't come loose easily. They work perfectly out of the box and required only quick calibration. For the money, I would say they are definitely worth it! It takes some time and patience to replace them.Pros:* Work straight away after assembly.* I've noticed a small improvement in the controller's battery life.* Nice and premium feel, even after installation.Cons:* Takes time and patience to replace the old ones with the new ones. (Not really a con, but I was stuck for four to five hours and didn't have all the tools.)* The thumbsticks might become loose after changing them a few times.Do I recommend them? Yes, absolutely!

Great TMR joysticks. Silky smooth compared to the stock ones. I like the custom KK thumb grips. The metal finish looks cool and feels great when aiming. My accuracy on COD has definitely improved but you’ll likely need to tweak your settings before noticing an improvement.Replacing is fairly straightforward if you have solid experience soldering on smaller boards. I wouldn’t recommend attempting this replacement if you aren’t competent with the above as there’s a large margin for error which will likely result in random faults with your pad or bricking it altogether.Make sure to calibrate your sticks out the box as mine came completely uncalibrated. Once calibrated, they work a treat.

these work really well, follow the ifixit guide with the calibration software link. worked perfectly for me. these sticks feel really nice and smooth, the included thumbsticks are good quality and the extra rubber thumbstick caps feel nice too.Desoldering the old stick is a little tricky without the proper tools as the board wicks away a lot of heat so you're going to want to get the stick area evenly heated. A hot air station would be ideal so you can take the whole stick out at once or you can use low melt solder but if you only have a soldering iron and normal leaded solder like me (don't use lead free as high melting point) then heating each of the joints around the stick a few times should get it sufficiently hot to be workable. I unclipped the pots from the housings and wiggled them until the legs snapped then cut the mounting points for the old stick and l3/R3 buttons, it's a lot easier to get the legs out of the board individually with a solder pump than trying to get the whole stick out with a soldering iron

I changed my self on ps5 controller I calibrated with the online software everything works fine the second day my controller won’t turn on was dead completely ….

After using these in a dualsense ps5 controller for several months now I can honestly say this was the best purchase I’ve made! No more drift! Not even a little bit after several months of gameplay and I game loads so they’ve been put through it with no problems!

These replacement Hall Effect joysticks work great, but keep in mind you’ll need some soldering skills. Removing the old sticks can be a bit tricky since you’ll have to desolder and solder the new ones in.After installation, I had to calibrate the controller using a website, but that was quick and easy to find with a simple Google search.Overall, definitely worth the money—they work perfectly and gave me no issues at all.

Installed the sticks to my controller and all worked fine, after a few weeks one of them developed some issues but the seller sent me a new pair after some back and forth.The included KK thumbsticks rubbed against the shell so I chose to use the old factory thumbsticks instead.Some soldering skills needed, if you know what you're doing then it's quite simple.

These are great thumbsticks! If you are going to buy and fit these, use a hot air station to remove the old ones and it's literally a 10 minute job to swap them over. It can be done with a soldering iron, but through hole components aren't really designed to be removed that way. Once install, they're easy to calibrate. One other note, if you get any rubbing inside the dualsense once these are fitted, just use a hobby knife to cut about 1-2mm of the side of the thumbstick down a bit. The way the thumb caps sit on the thumbsticks is a little raised edge which can sometimes be a hair too high and cause it to rub against the onside of the controller