If I order 2 units will they be the same channels?

We did this. It works just fine as long as you don’t turn on 2 mics on the same channel at the same time. So you have to get religious about switching mics off when not speaking. I.e. when a mic is off, it doesn’t just get muted, it stops transmitting. So then if you turn on both (e.g.) channel 3 mics, there are 2 transmitters on nearly the same frequency and it tends to squeak and squawk a bit. That’s why they don’t allow 2 radio stations on the same frequency in a local geographic region. They squeak and squawk bashing against each other at your radio. Oh, BTW this means that you only use 1 of the 2 receiver boxes you bought with each of its 8 channels servicing 2 microphones. So you have a spare receiver box.

Can I connect this unit to PC microphone jack?

Yes. We did that a few weeks ago. You do need the 1/4" to 1/8" adapter of course. But our unit had a lot of hum/hiss in it, rendering it unusable.I'm thinking that cabled versions (shielded cables) might be an option (saw them in Russia recently, ironically).But I decided this is awkward unless you have one mike per person, so I'm looking at sensitive microphones. Some seem to be able to cover large areas. For which a USB interface seems to be suggested, not plug in. Sound cards in PCs seem to not be adequate for good results, I've read - and experienced.

Can the microphones be used to connect to an ipad, which will then be used via a usb mixer, for a google hangouts call?

The microphone receiver has an XLR and a 1/4 inch jack for audio out. As long as your mixer has one of these connectors or you have the appropriate adapter. I connect the mics to my mixer via XLR. At the same time I connect the 1/4 inch jack to an input on a public address system. The mixer connects to a BlackMagic Intensity Shuttle via RCA connectors adapted from an 1/4 inch jack. The shuttle connects to my computer via Thunder Bolt or USB depending on which type I'm using (PC or MAC).

Is there a sleeping mode on the receiver if we don't use any microphone for let's say 2 days? Does the receiver turn off?

Greetings! I have purchased 2 sets of these mics and use a 3rd. (Used in two churches for worship & meeting Zooms, and by our Presbytery for meetings). To my knowledge, the receiver does not have a 'sleep mode'. But to be fair, I don't leave the receiver on, nor do I leave the batteries in the mics, beyond the time they are being used.

Power Source	Battery Powered
Number of Batteries	1 9V batteries required.
Signal-to-Noise Ratio	90 dB
Frequency Response	16 KHz
Audible Noise	90 dB
Hardware Platform	PC
Number of Channels	8
Polar Pattern	Unidirectional
Audio Sensitivity	92 dB
Microphone Form Factor	Microphone System
Connectivity Technology	Wireless
Connector Type	XLR
Special Features	Rack Mountable Receiver Base
Compatible Devices	Tablet, Speaker
Item Weight	17.7 Pounds
Item Dimensions	23.2 x 8.5 x 13 inches
Material Type	case
Color	Black

Pyle8 Channel Wireless Microphone System - Portable VHF Cordless Audio Mic Set with 1/4" and XLR Output, Dual Antenna, - Includes 8 Table Top Mics, Rack Mountable Receiver Base - Pyle PDWM8300,Black

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions