H7 LED Headlight Car Bulb Adapter Holder Socket for KIA K3 K4 K5 Sorento SportageR Coupe Grand Santa Fe Hyundai Sonata9 Coupe Veloster 2pcs

Okay so the fit my headlight housing but the inside bore was maybe 1/8 larger all the way around than my headlight outside diameter. I ordered Engniek H7 led bulbs off Amazon and realized I needed these after arrival. I fixed the problem with some small fiber optic cable I had in a drawer that was around 1/8 thick. I cut 4 pieces for each housing to size and put red RTV silicone on each piece before sliding them in the housing. I topped it off with a little more silicone and set a flowerpot on each until they dried. You will need to install the brackets into the headlight housing first and then push the H7 buld into it's bore. The metal bracket that came with the bulbs with turn on the o-rings causing the bracket not to lock in if you tried to install everything at once. Look at the pictures and the metal section came with the bulbs and the plastic sections are what you're ordering here. Everything seems to be centered up fine but again, you might have to modify depending upon what light manufacturer you go with. Some might have a bigger outside diameter allowing for no modifications. I still give it 5 stars for the fact that it fits my headlight housing. It's my fault for not checking the bore size of my bulbs.

I used the GZXY adapter to replace the halogen low beam H7 bulbs with Hikari 2021 Acme H7 LEDs on my wife's 2021 Kia Sedona EX. I figured I would put some instructions together to help others out since none are given with the adapter.Prior to starting this project, you will need (6) 13/16" x 5/8" x 3/32" #12 O-rings. Remove the adapter from your Hikari Acme bulbs, or equivalent, and place (3) O-rings onto the Hikari adapter (see pic). Squeeze the GZXY adapter onto the Hikari adapter lining up the notch (see pic). I also used a little bit of superglue where the two adapters touch to hold them together better. The finished product should mimic the OEM bracket setup (see pic).With the O-rings, this is a rock solid setup on my wife's van, and I do not have to worry about the bulb jiggling in the socket or adapter as she drives down the road at night.

They sold me a product that needed an additional part to be installed. I ordered the additional part, an adapter, and these bulbs did not fit. The video for my mechanic was totally wrong. Their literature listed my exact car as compatible, but it wasn't. BTW: My mechanic has installed a lot of after market LEDs, so he knew what he was doing.They never admitted their wrong and never offered a refund. My time for an Amazon refund had expired.Use LASFIT for LEDs or HIDs. They are plug 'n play and work perfectly. No support or additional parts required.

Kias require these for an LED headlight upgrade. They work but LED kits come in varying sizes so may require a bit of a little improvising to get fitment right. They're also made of cheap plastic but nobody sells metal ones. You're basically just paying for shipping from amazon at a $9 price point anyways.

These work great! The only thing I would do is to add some tape on the inside of these adapters if the bulb isn't snug. I had to add a few layers of duct tape to make the bulbs I had purchased fit snugly, which was no big deal.

It works but it's really difficult to put on. The piece fits on but not super tightly and it's really hard to slide the price in to the fitment

Bought these for my 2013 Hyundai Genesis coupe 2.0t Rspec and they fit perfectly and were easy to install.. would recommend 100%

After much research & attempts to determine which adapter would be correct for my 2019 Hyundai Kona.I found this adapter to be the correct one. I did have to Super Glue the base/metal attachment from my Hikari Ultra to the adapter. After ensuring metal base was well glued, installation of the adapter to the light assembly was easy, quick & simple. Inserted Hikari LED into adapter/ metal base combo, twisted to ensure 3 & 9 O'clock LED positioning. Wow!!, So satisfied with LED LIGHT OUTPUT. Use this adapter if you own a Hyundai 2019 Kona. Buy The Hikari Ultra as well.You won't be sorry. This adapter & The Hikari go together like a hand & glove.